Bosch E-Bike Error Code 430 (Internal Battery of On-Board Computer Flat): Meaning + Fix

TL;DR

Bosch error code 430 means the internal battery of the on-board computer is flat (Bosch notes this does not apply to BUI350). Official guidance: charge the on-board computer (in the holder or via USB port).

Do this first:
1. Charge the on-board computer in its holder/mount (if your model supports it).
2. If your display supports it, charge via the USB port.
3. Restart the system after charging and re-check.


What this code means (Bosch official intent)

Bosch error code 430 means the internal battery of the on-board computer is flat (Bosch notes this does not apply to BUI350). Official guidance: charge the on-board computer (in the holder or via USB port).


Quick fixes (safe DIY first)

1) Proper restart (the Bosch way)

  1. Turn the system off.
  2. Wait 10–20 seconds.
  3. Turn the system on and re-check.

2) 60-second check

  • Is the display properly seated in the holder/mount?
  • If your unit charges in the holder, confirm the holder contacts look clean and undamaged.
  • If charging via USB, try another known-good cable/charger.

3) If it started after rain / washing

  • Assume moisture at a connector/contact point.
  • Dry naturally, then re-check connectors (avoid pressure washing around the motor/display).

Most common causes

  • The on-board computer hasn’t been charged for a long time (internal battery drained).
  • Poor contact at the holder/mount preventing charging.
  • USB charging cable/port issue (less common).

When to stop DIY and go to a Bosch dealer

Go to a dealer if:
– The code returns after a restart and basic checks.
– You find damaged wiring, bent pins, corrosion, or signs of water ingress.
– The official guidance for this code says dealer (many do).


Related guides on this site (closed-loop)

More troubleshooting (optional):
https://jieli-electric.com/bosch-display-troubleshooting/
https://jieli-electric.com/e-bike-usb-port-not-working/


Notes (practical)

  • If you never see the on-board computer charge in the holder, the holder contacts are often the culprit.

Sources (official-first)

Similar Posts